Lexus 2013 GS 350 Owner's Manual page 728

Engine oil selection
■
"Toyota Genuine Motor Oil" is used in your Lexus vehicle. Use Lexus
approved "Toyota Genuine Motor Oil" or equivalent to satisfy the fol-
lowing grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity: SAE 0W-20
SAE 0W-20 is the best choice
for good fuel economy and good
starting in cold weather.
If SAE 0W-20 is not available,
SAE 5W-20 oil may be used.
However, it must be replaced
with SAE 0W-20 at the next oil
change.
Oil viscosity (0W-20 is explained here as an example):
• The 0W in 0W-20 indicates the characteristic of the oil which allows
cold startability. Oils with a lower value before the W allow for easier
starting of the engine in cold weather.
• The 20 in 0W-20 indicates the viscosity characteristic of the oil
when the oil is at high temperature. An oil with a higher viscosity (one
with a higher value) may be better suited if the vehicle is operated at
high speeds, or under extreme load conditions.
How to read oil container label:
The ILSAC (International Lubri-
cant Standardization
Approval Committee) Certifica-
tion Mark is added to some oil
containers to help you select the
oil you should use.
GS350_U (OM30C34U)
8-1. Specifications
Outside temperature
and
I n f o r ma t i o n P r o v i d e d b y :
755
8