Table of Contents
Advertisement
ç Contents
Wi-Fi
Cannot access the Wi-Fi menu by pressing the [ ] button.
●
The Wi-Fi menu is not available in Shooting mode. Switch to Playback
mode and try again.
●
In Playback mode, the Wi-Fi menu cannot be accessed during magnified
display or index display. Switch to single-image display and try again.
Similarly, the Wi-Fi menu cannot be accessed during group playback or
filtered image display according to specified conditions. Cancel group or
filtered image playback.
●
The Wi-Fi menu cannot be accessed while the camera is connected to a
printer, computer, or TV via a cable. Disconnect the cable.
Cannot add a device/destination.
●
A total of 20 items of connection information can be added to the
camera. Erase unneeded connection information from the camera first,
and then add new devices/destinations ( = 331).
Use a computer or smartphone to register Web services ( = 305).
●
●
To add a smartphone, first install the dedicated application
CameraWindow on your smartphone ( = 280).
●
To add a computer, first install the software CameraWindow on your
computer. Also check your computer and Wi-Fi environment and settings
( = 291, = 296).
●
Do not use the camera near sources of Wi-Fi signal interference, such
as microwave ovens, Bluetooth devices, or other equipment operating
on the 2.4 GHz band.
●
Bring the camera closer to the other device you are trying to connect to
(such as the access point), and make sure there are no objects between
the devices.
Cannot connect to the access point.
●
Confirm that the access point channel is set to a channel supported by
the camera ( = 440). Note that instead of auto channel assignment, it is
advisable to specify a supported channel manually.
395
Advertisement
Table of Contents
