Table of Contents
Advertisement
ç Contents
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the Wi-Fi menu.
You can easily connect again by pressing the [
choose the device and then pressing the [
new device, display the device selection screen by pressing the
[ ][ ] buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU
( = 58) ► [
●
A message is displayed if the nickname you enter begins with a symbol
or space. Press the [
●
When the camera is connected to a computer, the camera screen
is blank.
●
Mac OS: If CameraWindow is not displayed, click the
[CameraWindow] icon in the Dock.
●
To disconnect from the camera, turn off the camera.
●
If you chose [PIN Method] in step 6, a PIN code will be displayed
on the screen. Be sure to set this code in the access point.
Choose a device in the [Select a Device] screen. For further
details, refer to the user manual included with your access point.
11
z
Click [Import Images from
Camera], and then click [Import
Untransferred Images].
z
Images are now saved to the
Pictures folder on the computer, in
separate folders named by date.
z
Click [OK] in the screen that is
displayed after image import is
complete. For instructions on
viewing images on a computer,
refer to "Software Instruction
Manual" ( = 366).
] tab ► [Wi-Fi Settings] ► [Target History] ► [Off].
] button and enter a different nickname.
Import images.
] button. To add a
301
][
] buttons to
Advertisement
Table of Contents
