Control Dial; Adjusting Air Temperature - U-Line U-1075WCS-00 Service Manual

Control Dial

The control dial sets a single continuous set-point temperature. This
set point is for the middle zone, it is a base number used by the
controller to maintain the multiple temperature zones in the unit.
The temperature set point can be affected by the ambient conditions.
The unit is shipped with the control dial in a position suggested for
standard room conditions.

Adjusting Air Temperature

NOTICE
• Adjust the set point temperature in single increments,
and wait 24 hours for the temperature to stabilize before
rechecking.
• Factory recommended set-point is MID setting on dial
control.
To adjust the set point temperature:
Adjust the temperature by turning the numbered dial (1) in small
increments.
U-Line Service
General Information
6