Render Standby; Front Panel; Onboard Lan; Deep Sleep - ASROCK Z87EXTREME11/ac User Manual

PCIE7 Downstream Link Speed
Select the link speed from the PLX chip to the PCIE slot for PCIE7.
Share Memory
Configure the size of memory that is allocated to the integrated graphics processor
when the system boots up.
IGPU Multi-Monitor
Select disable to disable the integrated graphics when an external graphics card is
installed. Select enable to keep the integrated graphics enabled at all times.

Render Standby

Power down the render unit when the GPU is idle for lower power consumption.
Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel

Enable/disable front panel HD audio.
Onboard HDMI HD Audio
Enable audio for the onboard digital outputs.

Onboard LAN1

Enable or disable the onboard network interface controller.
Onboard LAN2
Enable or disable the onboard network interface controller.
WAN Radio
Enable/disable the WiFi module's connectivity.

Deep Sleep

Configure deep sleep mode for power saving when the computer is shut down.
Restore on AC/Power Loss
Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.
96