Automatic Pause Position For Pbx Access Codes - Panasonic DBS 824 Installation Manual

Automatic Pause Position For PBX Access Codes
FFl
Automatic Pause Position For PBX Access Codes
-
Sofhrvare Version: CPCS and CPC-M, Version 1.0 and higher
Address: FFl 2# 3# (9018)# (l-3)#
Description
This program inserts a pause in the PBX access code (and in SSD and PSD
codes) after the output of the first, second, or thiid digit.
The pause ensures that the PBX has time to connect to the central office
before the DBS 824 sends the PBX any digits. If an adequate pause is not
allowed, the DBS 824 will send digits to the PBX too quickly, causing the call
attempt to fail.
Different pause sequences can be assigned to each PBX access code.
Programming
To program an automatic pause . . .
FF1 2718)#. (liJ)#
First Digit of PBX Access Code
l=Pause after 1st digit
(see table below)
2=Pause after 2nd digit
3=Pause after 3rd digit
Address Number Dial Digit
9 1
., 10 2
11
3
I. 6 I
15 7
16
8
17
9
18 0
Page164 DBS 824-10-400 Issued 3/l/95