Non-Appearing Trunk Hold - Panasonic DBS 824 Installation Manual

Non-Appearing Trunk Hold FFl
Non-Appearing Trunk Hold
Software Version: CPC-S and
CPC-M,
Version 1.0 and higher
Address:
FFl 2# l# lO# (0 or l)#
Description
Use this program to determine who can pick up trunk calls that are on hold.
This program applies to DBS 824 telephones that don't have dedicated key
appearances for trunk calls (the phone user can't tell which trunk is being
used for incoming or outgoing calls).
If a trunk call on one of these phones is placed on hold, this program
determines whether it is System Hold (default setting; any other extension
phone can pick up the call) or Exclusive Hold (the call can be retrieved only
on the extension where it was placed on hold).
Programming
I
FFl 2# l# lO# (0 or l)#
t
O=Exclusive Hold is used for non-appearing trunk calls.
l=System Hold is used for non-appearing trunk calls.
1.
Notes
Applicable Phone Types. This feature applies to both single-line and digital
telephones.
Number of Trunks That Can Be Held Without Key Appearances. Phones
that do not have a key appearance for trunk calls can only hold one trunk at a
time.
.
Page1-14 DBS824-lo-400 Issued 3/l/95