Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical
positions to conform to your computer.
Auto PC adj.
1
Menu. Use the Point
and then press the Point
2
Use the Point
To store adjustment parameters
The adjusted parameters from the Auto PC Adjustment can
be stored in the projector. Once the parameters are stored,
the setting can be done just by selecting a Mode (1–10) in
Note:
Fine sync, Total dots, Horizontal and Vertical
position of some computers cannot be fully adjusted
with the Auto PC Adjustment function. When the image
is not provided properly with this operation, manual
576i, 480p, 576p, 720p,1035i or 1080i is selected in the
Downloaded From projector-manual.com Viewsonic Manuals
Auto PC Adjustment
Menu Operation
buttons to select PC adjust
buttons to select Auto PC adj. and
PC adjust Menu
Use Point
adj.
Please wait... appears while the Auto PC
adjustment is in process.
480i,
Computer Input
Auto PC adj.
Fine sync
►
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
buttons
to select Auto PC
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
Current mode
Clamp
Display area H
Display area V
Reset
Mode free
Store
0
1365
0
0
0
1024
768
0
1365
0
0
0
1024
768