Seiko 8X53 Complete User Manual page 49

7
TROUBLESHOOTING
9
Rotate the crown to adjust the indicator
hand as shown in the figure.
Adjust the indicator hand to the position as
shown in the figure.
 If the indicator hand points as shown in the figure,
go to operation of ⑩.
Turn the crown
clockwise to
advance 1 step.
Turn the crown
quickly to move
it continuously.
Turn the crown
again to stop.
Turn the crown
counterclockwise
to set back 1 step.
 The indicator hand makes one complete turn, but
this does not mean a failure.
10 11
Press Button A and then
release it.
The watch goes into the The hour/minute hands
preliminary position setting move, and stop at "12:00
mode of the hour and am. "
minute hands.
Press and
then
release
The second hand
stops at the 0-second
position.
ASTRON 8X53 GPS SOLAR
Continue to press
12
Push the crown back
Button B (three
in.
seconds).
The watch exits the mode
to adjust the preliminary
position, and the second
hand and the hour/minute
hands start moving.
Press
Button B
for three
seconds
48
13
Set the time by
receiving GPS signals.
When you are in a place where
GPS signals can be easily
received, adjust the time zone.
 How to adjust the time zone
After operation of ① to
⑫ is completed, make
Push the
crown sure to set the time.
back in
0 1 2
When you are in a place
where GPS signals cannot
be received
① Carry out manual time zone
setting
 How to manually set the time
zone P.23
② Manually set the time
 How to manually set the time
P.44
When the time is set,
operation is completed.
P. 18