Samsung SCH-R312 Series User Manual page 102

Note: Speaking clearly, say the command that you want to use.
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
If, after a few more seconds, it still has not recognized a command, it
tells you "Sorry, no match found," and cancels voice recognition.
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
Speak clearly at a normal volume, as if you were talking on the phone.
•
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voice-
activates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
99
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can display
a list of up to three possible choices, and prompt you to confirm
the correct one.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you can
choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at "Automatic," VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
To change the way VoiceSignal uses choice lists:
At the Voice SVC menu, select Voice Settings
Lists the following options appear in the display:
• Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
• Always On—VoiceSignal always displays a choice list, even
when there is only one choice.
• Always Off—VoiceSignal never displays a choice list.
Select the preferred Choice List behavior.
Choice
➔