Jonsered 2149 Operator's Manual page 35

Bar and chain combinations
The following combinations are CE approved.
Bar
Length, Pitch,
inches inches
13 0,325
15 0,325
16 0,325
18 0,325
20 0,325
13 0,325
15 0,325
16 0,325
18 0,325
20 0,325
Type Inch Inch/mm
S30 0,325" 0,050"/1,3
S25 0,325" 0,058"/1,5
EC-declaration of conformity
Jonsered, SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declares under sole responsibility that the chain saws Jonsered
2149 Turbo, 2149W Turbo, 2149 Turbo CAT, 2149W Turbo CAT from 2002's serial numbers and onwards (the year is clearly
stated in plain text on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S
DIRECTIVES:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3, 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
- of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the chapter Technical data.
The following standards have been applied: EN292-2, CISPR 12:1997, EN608.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EC type
examination in accordance with the machinery directive's (98/37/EC) article 8, point 2c. The certificates for EC type examination in
accordance with annex VI, have the number: 404/99/653 - 2149 Turbo/2149W Turbo, 404/00/742 - 2149 Turbo CAT/2149W Turbo
CAT.
In addition, SMP, Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The certificate
has the number: 01/161/023 - 2149 Turbo/2149W Turbo, 01/161/024 - 2149 Turbo CAT/2149W Turbo CAT.
The supplied chain saw conforms to the example that underwent EC type examination.
Huskvarna January 3, 2002
Bo Andréasson, Development manager
TECHNICAL DATA
Chain
Max.
tip radius
10T Jonsered S30
10T Jonsered S30
10T Jonsered S30
10T Jonsered S30
10T Jonsered S30
10T Jonsered S25
10T Jonsered S25
10T Jonsered S25
10T Jonsered S25
12T Jonsered S25
1
5
Inch/mm
3/16" /4,8
3/16" /4,8
Degree Degree Degree
85° 30°
85° 30°
(Applies to Europe only)
Inch/mm
10° 0,025"/0,65 13"/33:56 15"/38:64
16"/40:66 18"/45:72
10° 0,025"/0,65 13"/33:56 15"/38:64
16"/40:66 18"/45:72
L
Inch/cm: dl
20"/50:78
20"/50:78
35
English –