Cable Network Setup - Samsung 950 User Manual

3. Press the ENTER
G'
button to select "Internet Protocol Setup".
4. Press the .. or T button to select "Auto Setup", then press the ENTER
G'
button.
>-
The Internet Protocol is set automatically.
>-
Select "Network Test" to check the network connectivity.
(Refer to page 122)
Press the EXIT button to exit.
>-
First, the "Network selection" must be set to "Cable". (See page 120)
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP) Settings are automatically configured.
>-
Please check if the LAN cable is connected. (See page 118)
1. Press the MENU button to display the menu.
Press the .. or T button to select "Setup", then press the ENTER
G'
button.
2.
Press the .. or T button to select "Cable Network Setup", then press the
ENTER G' button.
Cable Network Setup
I
Manual Setup
To connect the TV to the LAN using a static IP address, you must set up the
Internet Protocol (IP).
>-
Please check if the LAN cable is connected. (See page 119)
1. Press the MENU button to display the menu.
Press the .. or T button to select "Setup", then press the ENTER
G'
button.
2.
Press the .. or T button to select "Cable Network Setup", then press the
ENTER G' button,
3. Press the ENTER
G'
button to select "Internet Protocol Setup",
4.
Press the .. or T button to select "Manual Setup", then press the ENTER
G'
button,
5.
Press the .. , T, .... or
~
button to move to an item, and press the numeric
button to configure the selected item, Press the ENTER
G'
button,
>-
Select "Network Test" to check the network connectivity.
(Refer to page 122)
Press the EXIT button to exit.