Removal Of Shielding Lids - Nokia 6680 Service Manual

nokia
C P
ONNECTING EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
40.) Push out the Slide Sensor with tweezers.

10. REMOVAL OF SHIELDING LIDS

1.) Use always the Soldering Jig as a support when
working on the Engine Module.
3.) The lid can be removed, if all clips of the Shielding
Lid are in the shown position.
Service Manual 6680 Level 1&2
PAGE 17 (26)
CONFIDENTIAL
41.) Now, remove the Slide Sensor. Note the right
position when re-assembling.
2.) Open the clips of the Shielding Lids with the dental
tool.
4.) Use a slotted screwdriver as a lever to lift the
Shielding Lids. Always use new Shielding Lids for re-
assembly.
Copyright © 2005 Nokia Corporation. All rights reserved.
Approved 1.0
DJK
22.02.2005