Table of Contents
Advertisement
Everything you need to boot this
motherboard is included in this
Easy Installation Guide. For more
information, a complete
User's Manual
can be found in the
Bonus Pack CD
Disc. Thanks for
the help of saving our earth.
This Easy Installation Guide x 1
80-Wire IDE Cable x 1
Floppy Drive Cable x 1
IEEE1394 Cable x 1 (MK79G-1394 only)
I/O Shield x 1
Bonus Pack CD disc x 1
PART NO: 49.8B102.002
DOC. NO: MK79GN-EG-E0301D
You can clear CMOS to restore system default setting. To
clear the CMOS, follow the procedure below.
1. Turn off the system and unplug the AC power.
2. Remove ATX power cable from connector PWR2.
3. Locate JP14 and short pins 2-3 for a few seconds.
Online
4. Return JP14 to its normal setting by shorting pin 1 & pin 2.
5. Connect ATX power cable back to connector PWR2.
This motherboard provides USB and PS2 keyboard / mouse wake-up function. You can use JP27 / JP28 to
enable or disable this function, which could resume your system from suspend mode with keyboard or
mouse installed. JP28 controls 1
setting is set to "Disable"(1-2), and you may enable this function by setting the jumper to 2-3.
nd
2
1
1. JP14 Clear CMOS
Pin 1
1
1
Clear CMOS
Normal Operation
(default)
2. JP27/28 USB Keyboard/Mouse Wakeup Jumper
st
USB channel, and JP27 controls 2
USB Channel
Pin 1
JP27
Disable
Enable
(Default)
Tip: When should I Clear CMOS?
1. Boot fail because of overclocking...
2. Forget password...
3. Troubleshooting...
nd
USB channel. The factory default
st
1
USB Channel
Pin 1
JP28
1
Disable
Enable
(Default)
Advertisement
Table of Contents
