NETGEAR ReadyNAS 102 Hardware Manual page 102
Readynas os 6 desktop storage
systems
Hide thumbs
Also See for ReadyNAS 102:
- Hardware manual (213 pages) ,
- Datasheet (4 pages) ,
- Hardware manual (65 pages)
Table of Contents
Advertisement
6.
Place the new 2.5-inch HDD or SSD in the disk tray.
7.
Secure the HDD or SSD to the disk tray using the screws that came with your storage
system.
Make sure that the HDD or SSD connectors face the interior of the disk tray.
Make sure that the HDD or SSD is installed on the correct side of the disk tray.
WARNING:
To prevent damage to your system, make sure that the disk tray is
correctly oriented before inserting it into the drive bay.
8.
Insert the disk tray back into the drive bay of the storage system.
•
For 2-bay and 4-bay systems, insert the disk tray so that the disk tray release latch is
near the bottom of the system.
ReadyNAS OS 6 Desktop Storage Systems
Disks
102
Hide quick links:
Advertisement
Table of Contents
