Table of Contents
Advertisement
Problem
No image on the TV
Music does not play
Images on TV look grainy
or lose color
Images on TV look dark
MP3 or CD player sound
is distorted
Remote is not responding
Troubleshooting
Cause
TV or VCR/DVD player is
not set to the proper input
Batteries in the base are
weak or exhausted
Base timed out
(sleep mode)
Base shut down
No wireless connection
between the base unit and
the remote
Music is paused on base
Batteries in the base are
weak or exhausted
Poor lighting
Volume is too high
Batteries in the remote are
weak or exhausted
Toy is being used in room
with bright sunlight
13
Solution
Change the TV or VCR/DVD player's mode to
INPUT or VIDEO IN.
Press the channel down button on your TV
or VCR/DVD player to change to a channel
below channel 2.
Consult your TV or VCR/DVD player's
instruction manual.
Replace the batteries in the base with four,
new "AA" (LR6) alkaline batteries.
The base times out (sleep mode) after 10
minutes of inactivity. Press any button to
turn it back on.
The base will shut off after it has been in
sleep mode for five minutes. Press the
power button to turn the base OFF; press
it again to turn the base back ON.
Make sure you have a clear path between
the remote and the base. Do not place the
base in a closed cabinet.
Press the play/pause button
to turn the music back on.
Replace the batteries in the base with four,
new "AA" (LR6) alkaline batteries.
Make sure the light source in
the room is either in front of
or above the subject.
Do not turn the volume on your extenal music
device to maximum volume. For best sound
quality volume should be set to ¾ of the
maximum volume.
Replace the batteries in the remote with
three "AAA" (LR03) alkaline batteries.
Dim the light in the room the toy is
being used.
MyToon TV
M M yToon
Toon TV
TV
Advertisement
Table of Contents
