GMC 2012 Sierra Series Owner's Manual page 121

If the position you are using
has an adjustable headrest
or head restraint and you
are using a single tether,
raise the headrest or head
restraint and route the
tether under the headrest or
head restraint and in
between the headrest or
head restraint posts.
2. See Securing Child Restraints
(Rear Seat Position) on
page 3 60 or Securing Child
Restraints (Center Front Seat
Position) on page 3 62 or
Securing Child Restraints (Right
Front Seat Position) on
page 3 62 for instructions on
installing the child restraint using
the safety belts.
3. Before placing a child in the
child restraint, make sure it is
securely held in place. To check,
grasp the child restraint at the
LATCH path and attempt to
move it side to side and back
and forth. There should be no
more than 2.5 cm (1 in) of
movement for proper installation.
I n f o r ma t i o n P r o v i d e d b y :
Seats and Restraints
Crew and Extended Cab Models
1. Attach and tighten the lower
attachments to the lower
anchors. If the child restraint
does not have lower
attachments or the desired
seating position does not have
lower anchors, secure the child
restraint with the top tether and
the safety belts. Refer to your
child restraint manufacturer
instructions and the instructions
in this manual.
1.1. Find the lower anchors for
the desired seating
position.
1.2. Put the child restraint on
the seat.
1.3. Attach and tighten the lower
attachments on the child
restraint to the lower
anchors.
3-57