Baofeng UV-2501 User Manual page 31

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
24 S-INFO Auto Group Dialing
25 EMC-TP Alarm Mode
26 EMC-CH Alarm Channel
27 RING-T Ring Time
28 CHNAME Channel Name
A Channel
29 CA-MDF
Display Mode
B Channel
30 CB-MDF
Display Mode
31 SYNC Sync Displays
32 PONMSG Power On Message
1 > 15
Group Signal Code
Memory
Can only be set with software
ALARM Turn on Alarm sound
ANI Send Alarm code and ID code
BOTH Both of the above
000 > 199 Specified Alarm Channel
OFF - No Ring Time
OFF, 1 > 10
1 > 10 seconds ring time when signal code received
Channel Name Edit In Channel Mode, edit the Current Name
FREQ
In Channel Mode, display the selected format in
CH
display A
NAME
FREQ
In Channel Mode, display the selected format in
CH
display B
NAME
OFF Separate A/B channel display.
Display A and B are synced.
ON This allows the upper display to show channel
Name while the lower shows the Frequency.
FULL Full Screen Display
MSG Show Power On Message
BATT-V Display Battery Voltage
25