Hotpoint CTF14 Use And Care Manual page 8

2ePull drawer out a few inches.Grip
drawer cover with both hands, lift
front off
supports and pull forward
just enough to detach cover from
rear support brackets.
3 Up-end drawer and cover with
front side up.
I
t
The slide-out meat drawer can be
4. Turn drawer and cover to lgft and
remove from refrigerator, (Withleft-
hand door, turn drawer and cover
to
.-
right.)
To repiace: reverse procedure,
making sure holes in rear of cover
hook onto supports at rear of
refrigerator and front of cover rests
on supports at front of refrigerator.
removed and taken to the sink or
food preparation area. You may also
relocate it within the fresh food
compartment to suit your storage
needs.
on
fdl-%dth shelf models, just
slide drawer out, remove drawer
cover from shelf above, relocate
cover in the position you desire it
and slide drawer back into place.
(hi half-tidth shelf models,the
drawer and the shelf to which it
attaches can be relocated at any
level.