GE AVP18 Owner's Manual page 12

Installation Instructions
Window Installation
Install the Window
Filler Panels
Leave a small space at the
bottom of the case side seal
groove.
Window molding
Slide the filler panel into place.
Install the Window
Gasket
Replace the Air
Conditioner
12
1 Insert the cut edge of the filler
panel into the case side seal
groove.
2 Push the filler panel backward
toward the window frame until it
Case
clears the window stool.
3 Slide the filler panel out from the
air conditioner case. Make sure it
contacts the window molding.
4 Use upholstery tacks to attach
the filler panel to the face of the
window molding through the
Case holes provided.
1 Cut the foam top window gasket
to the window width.
2 Stuff the foam between the
glass and the window to prevent
air and insects from getting into
the room.
1 Slide the air conditioner into the
case and replace the front grille.
2 Install the two ground/anti-theft
screws removed at the beginning
of the installation.
5 Pull the sliders out until they
contact the face of the window
molding. Pull the window down
tightly and lock it in place with
5⁄8" screws.
Attach through the holes on
each side of the window sash.
6 Attach the window locking
bracket with a 5⁄8" screw.
3 Make sure the unit is OFF before
plugging into the outlet.
4 Use the putty to fill in holes or air
leaks.
Attach