Asus MEL-M 370 User Manual page 29

III. HARDWARE SETUP
15. SB-Link™ Connector (6-1 pin SBLINK)
Using Intel's PC-PCI and serialized IRQ protocols found in this motherboard's
AGPset, this connector allows Sound Blaster 16 compatibility to AWE64D (Digi-
tal) or other PCI audio cards, enabling users to play Real-mode DOS games and
multimedia applications. SB-Link acts as a bridge between the motherboard and
the PCI audio card by providing the DMA and IRQ signals present in the ISA
bus but not available on the PCI bus.
1 0
R
MEL-M
MEL-M SB-Link™ Connector
16. Chassis Intrusion Sensor Lead (4-1 pin CHASIS)
This lead is for a chassis intrusion monitor or sensor. The sensor is triggered
when a high level signal is sent to the "chassis signal" lead. This occurs when a
panel switch or light detector is triggered. This function requires the optional
ASUS CIDB Chassis Intrusion Sensor Module (see APPENDIX) to be installed.
1
R
MEL-M
MEL-M Chassis Open Alarm Lead
1 0 1 0
0 1 0 1 0
ASUS MEL-M User's Manual
NOTE: Pin 3 is removed to ensure the
correct orientation of the cable on it.
PC/PCI Request
Sideband Signal
2 6
DGND
PC/PCI Grant
5
1
Sideband Signal
SBLINK
Serial IRQ
DGND
29