Table of Contents
Advertisement
LO COOL
FAN
/
OFF
Selector Switih
OFF turns air conditioner off.
speed
*
low fan
FAN
operation without cooling.
only operation, Energy
Saver Switch must be in the NORM
position.
LO COOL provides cooling with
low fan speed operation.
MED COOL provides cooling
with medium fan speed operation.
HI COOL provides cooling with
high fan speed operation.
Note: If the air conditioner is
shut off, wait at least two minutes
before restarting it.
SELECTOR
When you turn the Thermostat
Control to the desired setting, it
will automatically control the
temperature of the indoor air. The
higher the number selected, the
cooler the indoor air will be.
OPEN
Ventilation Control
When the Ventilation Control is at
the CLOSED position, the vent
door is closed and only tie air
inside the room can be circulated
and conditioned.
Set the control at the OPEN
position and the vent door opens to
allow air, smoke or odors to be
exhausted from the room.
Saver Fan cycle
SAVE
NORM
ENERGY SAVER
This switch controls the fan
operation.
NORM setting allows continuous
fan function, circulating air even
when the compressor has cycled
off and the thermostat setting has
been reached. This setting is
recommended for maximum
comfort.
SAVE setting lets the fan cycle on
and off with the compressor during
cooling. The fan stops when the
thermostat setting is satisfied. This
setting results in longer off time
and wider variations of room
temperature and humidity. This
setting is normally used when the
room is unoccupied.
only operation, Energy
Saver Fan Cycle Switch must be in
—
3
Advertisement
Table of Contents
