Asus CUV4X-CME User Manual page 8

HARDWARE SETUP
2) Floppy Disk Drive Connector (34-1 pin FLOPPY)
This connector supports the provided floppy drive ribbon cable. After connecting
the single end to the board, connect the two plugs on the other end to the floppy
drives.
CUV4X-CME
CUV4X-CME Floppy Disk Drive Connector
3) ATX Power Supply Connector (20-pin block ATXPWR)
This connector connects to an ATX power supply. The plug from the power supply
fits in only one orientation because of the different hole sizes. Find the proper
orientation and push down firmly making sure that the pins are aligned.
CUV4X-CME
CUV4X-CME ATX Power Connector
8 ASUS CUV4X-CME User's Manual
NOTE: Orient the red markings on
the floppy ribbon cable to
PIN 1
PIN 1