Asus CUV4X-CME User Manual page 11

HARDWARE SETUP
The following PANEL illustration is for items 8-11.
CUV4X-CME
CUV4X-CME System Panel Connectors
8) System Power LED Connector(2-pin PWRLED)
This 3-1 pin connector connects to the system power LED. The LED lights up
when you turn on the system power, and blinks when the system is in sleep or
soft-off mode.
9) Hard Disk LED Connector (2-pin HDLED)
This 2-pin connector is for the hard disk LED. This LED blinks during hard disk
operation.
10) ATX Power Switch Connector (2-pin PWR)
The system power is controlled by a momentary switch attached to this connector.
11) Reset Switch Connector (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting
the system without turning off the power switch. This is a preferred method
ASUS CUV4X-CME User's Manual
+PLED PWR
Power LED
-PLED Ground
+HDLED Reset
HD LED
-HDLED Ground
Requires an ATX power supply.
*
ATX Power Switch*
Reset SW
11