Ceiling Mount Installation - Optoma EP1690 User Manual

Please note that dam-
age resulting from
incorrect installation
will invalidate the
warranty.
Warning:
1. If you buy the ceiling
mount from another
manufacturer, please
ensure that there is at
least 10cm distance
between the bottom
cover of the projector
and the ceiling.
2. Avoid placing
the projector near
sources of heat such
as air-conditioning
units and heaters
otherwise it may
overheat and shut
down automatically.

Ceiling Mount Installation

1. To prevent damaging your projector, please use the ceiling
mount package for installation.
2. If you wish to use a third party ceiling mount kit, please
ensure the screws used to attached a mount to the projector
meet the following specifications:
Screw type: M3

Maximum screw length: 10mm

Minimum screw length: 7.5mm

15.6
http://www.pureglare.com.au
Appendices
79.50
1.00
67.08
347.3
4
English