Table of Contents
Advertisement
560A
Specifications
INPUT
Type:
Impedance:
Maximum Input Level:
CMRR:
OUTPUT
Type:
Impedance:
Maximum Output Level:
PERFORMANCE
Frequency Response:
Noise:
THD+N:
Dynamic Range
COMPRESSION
Gain Adjustment Range:
Threshold Range:
Threshold Characteristic:
Compression Ratio:
Attack Time:
Release Time:
POWER
Requirements:
Current Draw:
Power Draw:
PHYSICAL
Rack System:
Rack Space
Dimensions (H x W x D)
Weight:
Shipping Weight:
Notes: Noise and frequency response specifications are at unity gain.
0dBu=0.775Vrms
Specifications are subject to change without notice.
Electronically balanced/unbalanced, RF filtered
40kΩ balanced, 20kΩ unbalanced
+22dBu
>40 dB; typically >55 dB at 1 kHz
Electronically balanced/unbalanced, RF filtered
Balanced 30Ω, unbalanced 15Ω
+ 22 dBu
20 Hz – 20 kHz, + 0/-0.5 dB
0.5 Hz – 100 kHz, +0/-3 dB
<-97 dBu, Unweighted (22 Hz – 22 kHz)
<0.005% typical, No compression, 1 kHz input at 0 dBu
<0.07% typical, Any Amount of Compression up to 40 dB @ 1 kHz
>119 dB
Variable from -20 dB to +20 dB
-40 dBu to +20 dBu
Selectable OverEasy® or Hard Knee
Variable 1:1 to ∞:1 thru to -1:1; 60dB Maximum Compression
Program-Dependent; Typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB
Program-Dependent; Typically 8ms for 1dB, 80ms for 10dB,
400ms for 50dB; 125dB/Sec Rate
+/- 16VDC
60mA per power rail
1.92 watts
500 Series Compatible Power-frame
1 Slot
5.25" x 1.5" x 6" (13.34cm x 3.81cm x 15.24cm)
1.3 lbs (0.59 kg)
1.7 lbs (0.77 kg)
7
Advertisement
Table of Contents
