Liftgate; Liftgate And Built-In Storage - Ford 2016 MKC Quick Reference Manual

Liftgate

Manual Liftgate
To Open Using the Remote Transmitter
To Open the Liftgate
Open or close the liftgate with your remote control by
1. Unlock the vehicle and press the
pressing the
button on the liftgate to unlatch.
A tone sounds when the liftgate activates. You can
2. Press the button located in the top
also open or close the liftgate from inside the vehicle
of the liftgate pull-cup handle.
by pressing the
Power Liftgate*
Hands-free Liftgate Operation*
To Open Using the Outside Liftgate Button
1. Make sure you have your intelligent access
1. Unlock the liftgate with the remote control
transmitter within 3 feet (1 meter) of the liftgate.
or power door control. If the intelligent
2. Move your foot under and back from the rear
access transmitter is within 3 feet (1 meter)
bumper, similar to a kicking (front-to-back) motion.
behind the liftgate, the liftgate unlocks when
Do not move your foot sideways or the sensors
you press the liftgate release button.
may not detect the motion.
2. Press the button located in the top
Note: In vehicles equipped with the towing package,
of the liftgate pull-cup handle.
you must kick your foot between the trailer hitch and
3. Allow the power system to open the
the exhaust system. Do not kick under the hitch.
liftgate after pressing the control.
4. To close, press and release the
control (pictured).
12
button twice within three seconds.
button on the instrument panel.

Liftgate and Built-in Storage

Obstacle Detection*
When you use the power open or close feature and the liftgate detects a
problem, warning tones sound and the liftgate stops.
The Liftgate Does Not Power Open or Close When
It detects an object in its opening or closing path.
The ignition is on and the transmission is not in park (P).
You are traveling at speeds at or above 3 mph (5 km/h).
Note: Entering the vehicle while the liftgate is closing could cause the
vehicle to bounce and activate obstacle detection.
Setting the Liftgate Open Height
Once you open the power liftgate, you can move it manually to a
desired height. If the previously programmed liftgate height is lower
than the fully opened position, you can manually push it upward.
To Program a New Height
1. Open the liftgate.
2. Stop the liftgate movement by pressing the control button on the
liftgate when it reaches your desired height. Once the liftgate stops
moving, you can also move it manually to your desired height.
3. Press and hold the control button on the liftgate until you hear a tone,
indicating that your programming of the liftgate height is successful.
The next time you use the power feature to open the
liftgate, it opens to its newly programmed height.
To change the programmed height, repeat the process above.
*if equipped *if equipped
2 01 6 M K C
Built-in Storage
Cargo tie-downs, located in key areas of the rear cargo area, fold out of the
way when not in use.
Utility tray, located on the outboard side of the driver seat: store a wet
(or dry) umbrella within easy reach.
Toll-ticket holder, located between the headliner and the sun visor hinge:
slide your toll ticket in the space provided.
Rear under-floor storage helps secure items and keep them out of sight.
13