Power Wheels K7187 Owner's Manual With Assembly Instructions page 9

Lock Nut
Steering Column
3
• Place the lock nut (rounded side up) on to the end of the
steering column.
• Tighten the lock nut firmly using the closed end of the assembly tool.
Steering
Column
Cap
4
• "Snap" the steering column cap over the cap nut.
K7187pr-0726
ASSEMBLY
Assembly Tool
Rounded Side Up
5
SIDE VIEW
• Turn the vehicle upright.
• Pull the handlebar up to be sure the steering column is secure.
• If you can remove the steering column, you have not assembled
the steering column correctly. Please refer back to Assembly steps
3 and 4.
Handlebar
Connector
6
REAR VIEW
• Plug the handlebar connector into the motor connector.
Pull Up
Motor
Connector
F