Going Out of Range
When your radio goes out of the range of the system, it can no
longer lock onto a control channel.
Procedure:
1
A low-pitched tone sounds.
AND/OR
The display shows the currently selected zone/channel
combination and OUT RNG.
2
Your radio remains in this out-of-range condition until:
It locks onto a control channel.
OR
It locks onto a failsoft channel.
OR
It is turned off.
52
English
Using the Site Trunking Feature
If the zone controller loses communication with any site, that
site reverts to site trunking.
You hear a group of medium pitched tone and the display shows
the currently selected zone/channel combination and STE
TRNK.
Note:
When this occurs, you can communicate only with
other radios within your trunking site.