Start-Up And Use; Setting The Clock; Setting The Timer; Extralarge Space - Hotpoint OS 897D IX/HP Operating Instructions Manual

Start-up and use

! The first time you use your appliance, heat the empty
GB
oven with its door closed at its maximum temperature
for at least half an hour. Make sure that the room is
well ventilated before switching the oven off and
opening the oven door. The appliance may emit a
slightly unpleasant odour caused by protective
substances used during the manufacturing process
burning away.
! Never put objects directly on the bottom of the oven;
this will prevent the enamel coating from being
damaged.
! Always place cookware on the racks provided.
! During use, we suggest removing any crockery or
delicate foodstuffs from the recesses not in function.
! We suggest not opening the door when cooking
foodstuffs which require leavening, so as to not
compromise cooking results.
! If the door is subject to repeated jerking, the divider
may come out of its housing. If this happens, the time
will appear on the display. Make sure that the divider
is correctly installed then re-start cooking.
Cooling ventilation
In order to cool down the external temperature of the
oven, a cooling fan blows a stream of air between the
control panel and the oven door.
! Once cooking is completed, the cooling fan activates
and deactivates automatically until the oven has
cooled down sufficiently.

Setting the clock

! This may only be set while the oven is switched off.
1. Press the button until the first numerical digit
flashes on the display and the
are switched off.
2. Turn the TIMER KNOB towards "+" and "-" to
adjust the hour value.
3. Press the button again so that the other two
numerical digits on the DISPLAY begin to flash.
4. Turn the TIMER KNOB towards "+" and "-" to
adjust the minute value.
5. Press the button again to confirm.

Setting the timer

! This function does not interrupt cooking and does not
affect the oven; it is simply used to activate the buzzer
when the set amount of time has elapsed.
1. Press the button until the
digits on the DISPLAY begin to flash.
2. Turn the TIMER KNOB towards "+" and "-" to
6
, and icons
icon and the three
adjust the minute value.
3. Press the button again to confirm.
The display will then show the time as it counts down.
When this period of time has elapsed the buzzer will
be activated.

ExtraLarge Space

Starting the oven
1. Select the desired cooking function by turning the
EXTRALARGE SPACE FUNCTION knob. If the
icon on the display is lit, this indicates that the
ExtraLarge Space has been selected and therefore
that only the settings corresponding to the ExtraLarge
Space may be used.
2. The oven will begin its preheating stage. The
temperature may be changed by turning the
TEMPERATURE knob. The
during the pre-heating stage.
3. Once the pre-heating stage is completed, the
icon stops flashing (becomes fixed) and a buzzer
sounds. It is now possible to introduce foodstuffs into
the oven.
4. During cooking it is always possible to:
- Change the cooking function by turning the
EXTRALARGE SPACE FUNCTION knob.
- Adjust the temperature using the TEMPERATURE
knob (for the universal cooking functions only).
- Set a duration (for universal cooking functions only)
and the cooking end time.
- Stop cooking by turning the EXTRALARGE SPACE
FUNCTION knob to the "0" position.
5. If a blackout occurs while the oven is already in
operation, an automatic system within the appliance
will reactivate the cooking function from the point at
which it was interrupted, as long as the temperature
has not dropped below a certain level. Programmed
cooking modes which have not started will not be
restored and must be reprogrammed.
! When using the oven in its ExtraLarge configuration,
it will not be possible to use the Main and Small Space
features: the SMALL SPACE and MAIN SPACE
FUNCTION knobs will be disabled.
Universal cooking functions
! All functions have a default cooking temperature
which may be adjusted manually to a value between
40°C and 250°C as desired.
For the BARBECUE function, the default power level
value is indicated as a percentage (%) and may also
be adjusted manually.
indicator light flashes