Direct Transmission - Panasonic UF-5300 Operating Instructions Manual

Direct Transmission

If your machine's memory is full or you wish to send the document immediately, use Direct Transmission.
Manual Number Dialling (Direct Transmission)
Without stroing image into memory, follow the steps below.
1
2
3
4
Enter the telephone number from the keypad.
Ex:
5
Your machine starts to dial the telephone number.
NOTE
Downloaded From ManualsPrinter.com Manuals
Set document(s) face down.
8 9
1
5 5 5 1 2 3 4
1. If you need a special access number to get an outside line, dial it first and then press
to enter a pause (represented by a "-") before dialling the full number.
Redial/Pause
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling,
press (represented by a "/"). The dialling method will be changed from Pulse to Tone after
dialling the digit "/".
Ex: 9 PAUSE * 5551234
3. To stop the transmission, press
The display shows:
COMMUNICATION STOP ?
1:YES 2:NO
Press to stop the transmission. The Communication Journal will not print out regardless of
1
the printout mode setting of the Communication Journal.
Sending Documents
ENTER STATION(S)
THEN PRESS START 00%
MEMORY XMT=ON
1:OFF 2:ON
ENTER STATION
PRESS START TO DIAL
5551234
* DIALLING *
5551234
.
Sto p
00%
57