Lan; Basics Of Lan - Draytek Vigor 110 User Manual

Default MAC Address Type in MAC address for the router. You can use Default MAC
DNS Server IP
Address
After finishing all the settings here, please click OK to activate them.
3 . 2 L A N
3 . 2 L A N
Local Area Network (LAN) is a group of subnets regulated and ruled by router. The design of
network structure is related to what type of public IP addresses coming from your ISP.
Below shows menu items for LAN:
3 . 2 . 1 B a s i c s
3 . 2 . 1 B a s i c s
The most generic function of Vigor router is NAT. It creates a private subnet of your own. As
mentioned previously, the router will talk to other public hosts on the Internet by using public
IP address and talking to local hosts by using its private IP address. What NAT does is to
translate the packets from public IP address to private IP address to forward the right packets
to the right host and vice versa. Besides, Vigor router has a built-in DHCP server that assigns
private IP address to each local host. See the following diagram for a briefly understanding.
16
Specify an IP address – Click this radio button to specify some data.
IP Address – Type in the private IP address.
Subnet Mask – Type in the subnet mask.
Gateway IP Address – Type in gateway IP address.
Address or specify another MAC address for your necessity.
MAC Address – Type in the MAC address for the router manually.
Type in the primary IP address for the router. If necessary, type in
secondary IP address for necessity in the future.
o f L A N
o f L A N
Vigor110 User's Guide