Cc Sliders - Kurzweil PC3 User Manual

CC Sliders

CC Sliders allow you to virtually adjust the PC3‟s 9 Assignable Controllers. To make
adjustments from this window, use the mouse to move a slider up or down (the scroll wheel
can also be used here). MIDI Continuous Controller (CC) number assignments are displayed
at the top of the slider, while the actual control values appear at the bottom:
To change the MIDI channel that the CC Sliders control, click on the „Chn #‟ label. A contextual
menu will appear, allowing you to select a different MIDI Channel:
CC Sliders are part of a Setup configuration, and are programmed in the Setup Editor. For
more on the configuration and programming of the CC Sliders, see page 84.
92