Setting The Beeper, Year, Time, And Date - Accu-Chek Compact Owner's Booklet

Setting the Beeper, Year, Time, and Date

Setting the time and date is important if you use the meter's memory or connect to a computer.
1. With the meter off, press SET.
2. Press MEM to turn the beeper
on or off.
(See Notes on following page.)
Chapter 1: Understanding Your New Meter
3. Press SET. The last two numbers of the year will flash.
4. Press MEM to change the year, then press SET. The time format
(12h or 24h) will appear. The 24-hour format is known as military
time.
5. Press MEM to select the desired time format, then press SET.
6. Press MEM to change the hour, then press SET.
7. Repeat Step 6 until the minutes, month, and day are set.
8. When the time and date are set and ON (or OFF) appears again,
press to turn off the meter.
11
ACCU-CHEK Customer Care Service Center 1-800-858-8072