Installing The Test Drum - Accu-Chek Compact Owner's Booklet

Installing the Test Drum

1. With the meter off, slide the release button
toward the display to open the test drum
compartment.
2. If there is a used drum in the compartment,
hold the meter upright to remove the used
test drum. The empty drum drops out.
3. Remove a new test drum from its vial.
4. Slide the new test drum onto the plastic
post inside the compartment. It can only be
inserted in one direction.
5. Close the compartment door until it snaps.
(See Notes on following page.)
Chapter 1: Understanding Your New Meter
8
ACCU-CHEK Customer Care Service Center 1-800-858-8072