JVC AV-48WP30 User Manual page 11

AV-48WP30 English 3/12/02
Step Three - The Plug In Menu
When you turn your television on for the first time, the Plug In Menu will appear. This menu
sets some of the basic settings for your television. A complete description of the Plug In Menu
can be found starting on page 28. We recommend you complete the Plug In Menu items
before you start using your television. To begin watching your television right away you only
need to run the Auto Tuner Setup. This lets your television learn the channels it is able to
receive clearly. To run the Auto Tuner Setup, follow the steps below.
Press the " # buttons to move to AUTO TUNER SETUP
$%
Press the buttons to begin AUTO TUNER SETUP
$%
To choose CABLE (if you are connected to a cable system) or AIR (if you use
an antenna)
" #
To move to START
$%
To start Auto Tuner Setup
The Auto Tuner will now memorize all of the clear, active channels your television can
receive. This will take roughly one or two minutes.
The Auto Tuner is finished when the message PROGRAMMING OVER! appears on screen.
Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.
2:54 PM Page 11
Quick Setup 3
PLUG IN MENU
LANGUAGE ENG
AUTO TUNER SETUP
SET CLOCK
FINISH
SELECT BY
OPERATE BY
AUTO TUNER SETUP
TUNER MODE
START
SELECT BY
OPERATE BY
NOW
PROGRAMMING!
48
STOP The Quick Setup is complete
FRE SPA
EXIT BY
EXIT
CABLE
EXIT BY
EXIT
11