Electronic Timer; Starting The Oven; Special Functions - IKEA NUTID OV9 Product Description Sheet

GB
INSTRUCTIONS FOR USING THE ELECTRONIC TIMER NUTID

Electronic timer

1 2 3
4
Displays
Function selector knob
Setting button: ("set")
Confirmation button ("ok")
"-" "+"
Buttons for changing time ( )
Thermostat knob

Starting the oven

When the oven is connected to the power supply for the first time, or reconnected after a power failure, the display indicates
12. 0 0
" ".
Selecting and changing the clock time:
1. Press "set". The time of day flashes on the display.
2. Press button "-" or "+" to set the hour.
3. Press "set" and "-" or "+" to set the minutes.
4. Press "ok" to confirm.
To change the time:
Press and hold "ok" for 3 seconds. until the time flashes on the display. Repeat the steps described above.
Select cooking function:
1. Turn knob to the chosen function.
2. Turn knob to select the temperature.
(NB: during the "defrost" function, the temperature shown on the display is for guidance only and does not mean the oven
is heating up: the oven temperature remains comparable to room temperature, as per the description of the function in the
product description sheet).
3. Press "ok" to confirm; the oven will switch on. The indicator next to
4. The indicator switches off when the oven reaches the selected temperature.
To change the temperature:
1. Turn knob and select the desired temperature.
Important notes:
To cancel any selection, turn knob to "0". Alternatively, press "set" to switch the oven off, maintaining the previously
selected functions.
Selecting the cooking time:
Select the cooking time (available with any function, except for the special functions) to turn the oven on for a specified period
of time. At the end of the specified time the oven will switch off automatically. The maximum programmed cooking time is 6
hours.
1. Set the function and the temperature (see chapter: "Selecting the cooking function") up to point 2 without confirming by
pressing "ok".
2. Press "set" (the indicator on the display lights up next to the cooking time symbol
desired cooking time using buttons "-" o "+".
3. Confirm the selection by pressing "ok"; the oven switches on and the display shows the residual cooking time.
4. To change the previous temperature setting, turn knob
To return to the residual cooking time, wait 5 seconds.
5
switches on.
) and, within 8 minutes, select the
.
Appearance of on the display:
Once the set time has elapsed, an acoustic signal is heard and
The oven will switch off automatically.
To change the cooking time, use button "-" or "-" "+". Return to point 3 chapter "Selecting the cooking time".
1. Turn knob to "0"
The time of day appears again on the display.
Selecting the end of cooking time
Using this function it is possible to preset the end of cooking time. The maximum programmed cooking time is 23 hours and
59 minutes.
1. Proceed as described in points 1 and 2 chapter "Selecting the cooking time"
2. Press "set" to set the end of cooking time: the indicator next to the symbol
3. Set the end of cooking time using button "-" or "-" "+".
4. Press "ok" to confirm the end of cooking time.
The oven will turn on automatically at the end of cooking time minus cooking time: the indicators on the display above the
symbols will light up.

Special functions

Turn knob to function lights up next to the symbol
,
Keep warm
This maintains a constant temperature of 80°C in the oven.
1. Turn knob to the symbol
2. Press "ok" to confirm.
3. The indicator next to on the control panel switches off when a temperature of 80°C is reached, a factory-set time of 5
minutes flashes on the display and an acoustic signal sounds.
4. Place the food in the oven.
5. To change the preset time, use button "+" or "+" "-".
6. Press "ok" to confirm.
7. Once the set time has elapsed, the oven switches off, an acoustic signal is heard and
Pizza
This operates at a fixed temperature of 250°C and is ideal for baking pizzas.
1. Turn knob to the symbol .
2. Press "ok" to confirm.
3. The indicator next to on the control panel switches off when a temperature of 250°C is reached, a factory-set time of
12 minutes flashes on the display and an acoustic signal is heard.
4. Place the food in the oven.
5. To change the preset time, use button "+" or "+" "-".
6. Press "ok" to confirm.
7. Once the set time has elapsed, the oven switches off, an acoustic signal is heard and
Pyrolysis function
1. Turn knob to the self-cleaning Pyrolysis function,
1:30
automatically sets a minimum time of .
2. Use buttons "+" "-", to change duration of the self-clean cycle. The maximum programme time is 3 hours.
The end of pyrolysis time can be set as follows:
1. press "set" to set the end of pyrolysis time.
The indicator next to the symbol lights up.
2. Set the end of pyrolysis time using buttons "+" "-".
3. Press "ok" to confirm the end of pyrolysis time.
The oven will automatically turn on at the end of pyrolysis time minus pyrolysis time (set previously).
The indicators above the symbols light up.
4. To increase pyrolysis time, press "set" and then set the new pyrolysis time using the button "+".
5. Confirm by pressing the "ok" button".
When the set time has elapsed, an acoustic signal is heard and the display shows
6. Press "ok" to stop the acoustic signal.
7. Turn the knob to "0", the time of day appears again on the display.
appears on the display.
lights up .
.
appears on the display.
appears on the display.
Cln
and for 2 seconds the display shows clean , the selector
.