ECS A770M-A Manual page 38

32
HT3 Protocol Checker (Auto)
This item is used to set the HT3 Protocol Checker.
NB Transmitter Attenuation (00)
This item is used to set the Northbridge transmitter attenuation.
CPU Transmitter Attenuation (00)
This item is used to set the CPU transmitter attenuation.
NB & CPU HT Time Margining (Disabled)
This item is used to set the Northbridge and CPU HT time margining.
Press <Esc> to return to the Advanced Chipset Setup page.
Memory Configuration
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Memory Configuration
Memory Clock Mode
DRAM Timing Mode
Bank Interleaving
Channel Interleaving
Memory Hole Remapping
Unganged Mode support
Power Down Enable
Power Down Mode
Memory CLK
CAS Latency (Tcl)
RAS/CAS Delay (Trcd)
Row Precharge Time (Trp)
Min Active RAS (Tras)
RAS/RAS Delay (Trrd)
Row Cycle (Trc)
Memory Clock Mode (Auto)
This item is used to set the memory clock mode.
DRAM Timing Mode (Auto)
This item enables you to specify the DRAM timing mode to be configured automati-
cally or manually.
Bank Interleaving (Auto)
This item is used to set the bank interleaving.
Channel Interleaving (Auto)
This item is used to set the channel interleaving.
Memory Hole Remapping (Enabled)
This item allows users to enable or disable memory hole remapping.
Memory Configuration
Auto
Auto
Auto
Auto
Enabled
Enabled
Enabled
Channel
: 333 MHz
: 5.0
: 5 CLK
: 5 CLK
: 15 CLK
: 3 CLK
: 21 CLK
: Move Enter : Select F10: Save
+/-/: Value
F1:General Help F9: Optimized Defaults
Using BIOS
Help Item
Options
Auto
Limit
Manual
ESC: Exit