ECS GF7050VT-M Manual page 37

Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
1st/2nd/3rd Boot Device (Hard Drive/CD/DVD/1st FLOPPY DRIVE)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
Removable Drives (Press Enter)
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Removable Drives
1st Drive
: Move Enter : Select
F1:General Help
Press <Esc> to return to the Advanced setup page.
Boot Other Device (Yes)
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the First, Second, and
Third boot devices.
BIOS Protect (Disabled)
This item is set to enable or disable the BIOS Protect.
Press <Esc> to return to the main menu setting page.
Removable Drives
1st FLOPPY DRIVE
Specifies the boot
sequence from the
available devices.
+/-/: Value F10: Save ESC: Exit
F9: Optimized Defaults
Using BIOS
31
Help Item