Table of Contents
Advertisement
retting
to Know Your ULTIMA COOK
TM
Oven
10A. MICRO.
Touch this pad before entering
a cooking
time when setting a second
or third cycle in multi-cycle
cooking.
10B. COOK
POWER.
Touch this pad after
the cook time has been set, followed
by a Number
pad to set the amount
of
microwave
energy
released
to cook the
food. The higher the number,
the high-
er the power wattage
and the faster
the "cooking
speed."
11. BROIL.
Touch this pad to broil with the
broil element.
12. CRISP. Touch this pad to crisp
precooked
foods.
Use it also for baking
and for frying bacon and eggs,
sausages,
etc.
13. CONVECT/QUICK
PREHEAT.
Touch
this pad to put oven into the CONVECT
cooking
mode.
14. UPPER
OVEN
CANCEL/CANCEL
OFF. Touch this pad to cancel a
function.
See "Interrupting
Cooking"
later in this section
for more
information.
15. Number
Pads. Touch Number
pads to
enter cooking
times, cook powers,
selection,
quantities,
or weights.
16. See "Lower
Electric
Convection
Oven
Use and Care Guide" (Models
KEHC309J,
KEHC379J).
NOTES:
• If you touch one Function pad and then
want to choose another Function pad in the
same cycle, you must press CANCEL
first.
• If you attempt
to enter unacceptable
instructions,
three tones will sound. Touch
CANCEL
and re-enter
the instructions.
Audible
signals
Audible
signals are available
to guide you
when setting
and using your oven:
• A programming
tone will sound
each
time you touch a pad.
• Four tones signal
the end of a cooking
cycle or the Minute Timer countdown.
Choosing
cooking
function
settings
The cooking functions discussed in the
"Getting to Know Your ULTIMA COOK Oven"
and "Microwave
Cooking" sections use
Function pads to choose cooking function set-
tings. Another way to choose cooking function
settings is by using Code pads. Code pads
are Number pads used to select a cook power,
food settings, or quantities. Food setting charts
found in the "CUSTOM
REHEAT," "CUSTOM
DEFROST,"
and "ULTIMA COOK cooking
chart" sections list only Code pads for food
settings. The charts in "Using code pads" in
the "Microwave
Cooking" section list all the
available Code pads.
Interrupting cooking
You can stop the oven during a cycle by
opening the door. The oven stops heating
and the fan stops, but the light stays on.
To restart
cooking
for all cycles,
close
the door and
If you do not want to continue
cooking:
• Close the door and the light goes off
AND
_" CANCEL "i
UPPEROVE,
Using the control lock
The control lock prevents unwanted use of
the oven by disabling the control panel
function
pads.
NOTES:
• On combo ovens, control lock is available
only when both ovens are not in use. It is also
not available during the Self-Cleaning
cycle.
• On single
ovens, control lock is only avail-
able when the oven is not in use.
• Control
lock does not disable
the Timer
or Clock.
• Set control
lock when cleaning
the control
panel to prevent
oven from accidentally
turning
on.
8
Advertisement
Chapters
Table of Contents
