Honda Prelude 2003 Owner's Manual page 43

3. Press and hold the SET/decel
button on the steering wheel
until the CRUISE CONTROL
light on the instrument panel
comes on. This shows the system
is now activated.
The set speed may vary slightly,
particularly on hills.
Changing the Set Speed
You can increase the set cruising
speed in either of two ways:
Press and hold the accel/
RESUME button. The car will
accelerate slowly. When you
reach the desired cruising speed,
release the button.
Push on the accelerator pedal. Ac-
accel/
RESUME
celerate to the desired cruising
speed and press the SET/decel
SET/decel
button.
Steering Wheel Controls
You can decrease the set cruising
speed in either of two ways:
Press and hold the SET/decel
button. The car will decelerate.
Release the button when you
reach the desired speed.
Tap the brake or clutch pedal
lightly with your foot. The
CRUISE CONTROL light on the
instrument panel will go out.
When the car slows to the
desired speed, press the SET/
decel button. The car will then
maintain the desired speed.
Instruments and Controls
CONTINUED