Book - Mercedes-Benz Comand MY11 Operating Instructions Manual

Operating COMAND
32
To accept the first list entry: press W and
X
hold the COMAND controller until the
address entry menu appears.
The accepted list entry is shown there.
Calling up the list as a selection list
Select the desired city from the selection list.
If there are several entries for a city or if
several cities of the same name are stored,
then ¬ is highlighted in the character bar.
Press W the COMAND controller.
X
It is also possible to switch the city list to the
selection list at any time during character
input.
Slide W the COMAND controller
X
repeatedly until the city list appears as a
selection list.
or
Select ¬ in the character bar by turning
X
cVd the COMAND controller and press
W to confirm.
Option 2: city list as selection list
COMAND either shows the selection list
automatically or you can call up the selection
list from the list with character bar.
The example shows the selection list after the
city NEW YORK has been entered. The entry is
highlighted automatically.
Confirm NEW YORK with COMAND
X
controller W.
The address entry menu appears. You can
now enter a street, for example.
i
You will find further information in the
"Destination entry" section (
Entering characters in the address
and the phone book
Introduction
The following section describes how to enter
characters in the phone book (
and the address book (
Y
creating a new entry.
Creating a new entry in the phone book
Call up the input menu with data fields
X
( page 112).
Y
Phone book: input menu with data fields
Selected data field with cursor
:
Character bar
;
page 53).
Y
page 110)
Y
page 117) when