Parrot CK3100 Series Installation Manual page 7

308
1
Pass a guide from the glove box
towards the radio housing
3
Bring it out leaving sufficient
length
This document is a tool to assist with the installation of a Parrot product and is supplied purely for information. Any installation performed in
compliance with the instructions appearing in this document is done under the sole responsibility of the installer, who is entirely responsible
for the quality of the installation. All rights reserved © Copyright 2011 PARROT SA RCS PARIS 394 149 496. May not be reproduced without
the authorisation of Parrot SA. Pictures for information only.
Feeding the accessory cable
Pass the cable through the hole at
the bottom inside the glove box
Mount the supplied cover on the
cable
2
4