Seat Belt Warning Light/Beep - Mazda 2010 Mazda5 Owner's Manual

Mazda5_8AU7-EA-09H_Edition1 Page35
Wednesday, July 8 2009 11:26 AM
NOTE
When not in use, remove the seat belt extender
and store it in the vehicle. If the seat belt
extender is left connected, the seat belt
extender might get damaged as it will not
retract with the rest of the seat belt and can
easily fall out of the door when not in use and
be damaged. In addition, the seat belt warning
light will not illuminate and function properly.
Form No.8AU7-EA-09H
Black plate (35,1)
Essential Safety Equipment
Seat Belt Systems

Seat Belt Warning Light/Beep

The seat belt warning light illuminates
and a beep sound will be heard if the
driver's seat belt is not fastened when the
ignition switch is turned to the ON
position.
Conditions of operation
Condition
The driver's seat belt is not The warning light
fastened when the ignition flashes and a beep
switch is turned to the ON sound will be heard
position. for about 6 seconds.
The driver's seat belt is
The warning light
fastened while the warning
turns off and the beep
light and the beep sound are
sound stops.
activated.
The driver's seat belt is The warning light will
fastened before the ignition not illuminate and the
switch is turned to the ON beep sound will not be
position. heard.
qBelt Minder
NOTE
The belt minder can be deactivated. Consult an
Authorized Mazda Dealer to deactivate or
restore the seat belt minder.
Result
2-23