Mazda 2010 Mazda5 Owner's Manual page 289

Mazda5_8AU7-EA-09H_Edition1 Page289
Wednesday, July 8 2009 11:29 AM
The quality designation SM, or ILSAC
must be on the label.
–30 –10
–20 0
–20
0 20
5W-20
qInspecting Engine Oil Level
1. Be sure the vehicle is on a level
surface.
2. Warm up the engine to normal
operating temperature.
3. Turn it off and wait at least 5 minutes
for the oil to return to the oil pan.
4. Pull out the dipstick, wipe it clean, and
reinsert it fully.
5. Pull it out again and examine the level.
The level is normal if it is between
Low and Full.
If it is near or below Low, add enough
oil to bring the level to Full.
Form No.8AU7-EA-09H
10 30
20 40 50
80 100
40 60 120
Full
OK
Low
Black plate (289,1)
Owner Maintenance
CAUTION
Do not add engine oil over Full. This
may cause engine damage.
6. Make sure the O-ring on the dipstick is
positioned properly before reinserting
the dipstick.
The distance between Low and Full on the
dipstick represents the following:
Oil capacity
L (US qt, Imp qt)
Maintenance and Care
0.75 (0.79, 0.66)
8-19