Mazda 2008 CX-7 Owner's Manual page 203

Mazda 2008 cx-7 automobile owner's manual
Hide thumbs Also See for 2008 CX-7:
Table of Contents

Advertisement

CX-7_8X59-EA-07E_Edition3 Page203
Wednesday, July 25 2007 3:18 PM
NOTE
The advanced key can be set so that the KEY
indicator light (green) does not flash even if
the battery power is low.
Refer to Setting Change (Function
Customization)(page 3-18).
qSecurity Indicator Light
This indicator light starts flashing every 2
seconds when the ignition switch is turned
from the ON to the ACC position and the
immobilizer system is armed.
The light stops flashing when the ignition
switch is turned to the ON position with
the correct ignition key.
At this time, the immobilizer system is
disarmed and the light illuminates for
about 3 seconds and then goes out.
If the engine doesn't start with the correct
ignition key, and the security indicator
light keeps illuminating or flashing, the
system may have a malfunction. Consult
an Authorized Mazda Dealer.
Form No.8X59-EA-07E
Warning/Indicator Lights and Beep Sounds
qHeadlight High-Beam Indicator
This light indicates one of two things:
l
l
qShift Position Indicator Light
This indicates the selected shift position
when the ignition switch is in the ON
position.
Black plate (203,1)
Light
The high-beam headlights are on.
The turn signal lever is in the flash-to-
pass position.
Gear position indicator
Driving Your Mazda
5-49

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents