Mazda 2007 Mazda3 4-Door Owner's Manual page 52

Mazda3_8V66-EA-06F_Edition2 Page51
Friday, May 26 2006 10:53 AM
qChild-Restraint System Installation
Procedure (Rear Outboard Seats)
1. Make sure the seatback is securely
latched by pushing it back until it is
fully locked.
2. Expand the area between the seat
bottom and the seatback slightly to
verify the locations of the LATCH
lower anchors.
NOTE
The markings above the LATCH lower
anchors indicate the locations of
LATCH lower anchors for the
attachment of a child-restraint system.
3. Secure the child-restraint system using
BOTH LATCH lower anchors,
following the child-restraint system
manufacturer's instruction.
4. If your child-restraint system came
equipped with a tether, that probably
means it is very important to properly
secure the tether for child safety. Please
carefully follow the child-restraint
system manufacturer's instructions
when installing tethers.
Form No.8V66-EA-06F
Black plate (51,1)
Essential Safety Equipment
Child Restraint
Anchor bracket location (4 Door)
Tether strap position (4 Door)
Anchor bracket
Anchor bracket location (5 Door)
Anchor bracket
Tether
strap
2-37