CX-9_8V83-EA-06I_Edition3 Page260
Monday, February 26 2007 7:19 PM
Interior Comfort
Audio System
qOperating the Radio
Manual tuning dial/Auto memory
Seek tuning
button/Electric serial number
buttons
Radio ON
Press a band selector button (
turn the radio on.
Band selection
Successively pressing the band selector
button (
) switches the bands as
follows: FM1→FM2→AM.
The selected mode will be indicated. If
FM stereo is being received, ST will be
displayed.
NOTE
If the FM broadcast signal becomes weak,
reception automatically changes from
STEREO to MONO for reduced noise, and the
ST indicator will go out.
6-34
Form No.8V83-EA-06I
Band selector button
Scan button
Satellite button
Tuning
) to
The radio has the following tuning
methods: Manual, Seek, Scan, Preset
channel, and Auto memory tuning. The
easiest way to tune stations is to set them
on preset channels.
NOTE
If the power supply is interrupted (fuse blows
or the battery is disconnected), the preset
channels will be canceled.
Manual tuning
Turning the manual tuning dial will
change the frequency higher or lower.
Seek tuning
Pressing the seek tuning button ( ,
will cause the tuner to seek a higher or
lower frequency automatically.
Black plate (260,1)
Channel preset buttons
)