Mazda 2007 CX-9 Owner's Manual page 175

CX-9_8V83-EA-06I_Edition3 Page175
Monday, February 26 2007 7:18 PM
Indicators
Shift position indicator
In manual shift mode, the M of the shift
position indicator in the instrument panel
illuminates.
Gear position indicator
The numeral for the selected gear
illuminates.
Shift position indicator
Gear position indicator
NOTE
If the gears cannot be shifted down when
l
driving at higher speeds, the gear position
indicator will flash twice to signal that the
gears cannot be shifted down.
If the automatic transaxle fluid (ATF)
l
temperature becomes too high, there is the
possibility that the transaxle will switch to
automatic shift mode, canceling manual
shift mode and turning off the gear position
indicator illumination. This is a normal
function to protect the AT. After the ATF
temperature has decreased, the gear
position indicator illumination turns back
on and driving in manual shift mode is
restored.
Form No.8V83-EA-06I
Black plate (175,1)
Starting and Driving
Shifting
Manually Shifting up
(M1→M2→M3→M4→M5→M6)
To shift up to a higher gear, tap the shift
lever back ( ) once.
NOTE
When driving slowly, the gears may not
l
shift up depending on vehicle speed.
In manual shift mode, gears do not shift up
l
automatically. Don't run the engine with the
tachometer needle in the RED ZONE. If the
tachometer needle enters the RED ZONE,
you may feel engine-braking because the
fuel delivery will be stopped to protect the
engine. However, this does not indicate an
abnormality.
When depressing the accelerator fully, the
l
transaxle will shift to a lower gear,
depending on vehicle speed.
Driving Your Mazda
5-13