Starting And Driving; Ignition Switch - Mazda 2006 RX-8 Owner's Manual

RX-8_8U58-EA-05J_Edition1 Page132
Thursday, August 25 2005 4:54 PM
Driving Your Mazda

Starting and Driving

Ignition Switch

(With advanced key)
NOTE
When starting the engine using the
advanced key, refer to Starting the
Engine (page 3-10).
When starting the engine with the
auxiliary key, perform the following
procedure.
1. Remove the auxiliary key from the
advanced key (page 3-16).
2. Make sure the start knob is in LOCK
position.
3. Remove the start knob by pulling it
outward while pressing the buttons on
both the left and right sides.
5-2
Form No.8U58-EA-05J
Black plate (132,1)
qIgnition Switch Positions
With advanced
key
Without advanced
key
LOCK
The steering wheel locks to protect
against theft. Only in this position can the
key be removed.
Manual transmission
To turn the key from the ACC to the
LOCK position, push the key in at the
ACC position, then turn it to the LOCK
position.
Push the key